|
Hank Breedlove Machine Shop P.O. Box 12756 Gastonia, NC 28052 EMAIL: breedlove1@bellsouth.net PHONE: 704 853 8746 |
|
The coaxial cable connector is also of my own design and will not pull apart like the others on the market. The brass bolt carrying the signal is completely insulated where it passes thru the connector but the special way of locking the stud allows the outside threads to be fully grounded to the bracket while pulling the antenna mount as tight as needed. The body of the connector is 1 & 1/2 inch in diameter with a 1/2-20 threaded stud. The top is a standard 5/8-24 thread, the same as an SO-239 connector, and fits the PL-259 plug. The connector has a 1-1/2 inch long stud. In passing thru the 1/4 inch plate of the bracket and the insulators under the mount, that leaves 1 inch that screws into my mounts. It is so long because a lot of people when mounting my stuff use mounting plates up to 1/2 inch thick. That still leaves a lot of threads in the mount. It is probably a bit long for most other mounts but being brass can be easily shortened for your needs. (saw or grind) The connector also has the insulator extending down around the stud about 1/8 inch. Just enough to center it in the hole. The insulator under the mount also has a lip that extends down around the stud as well. The center stud is solid brass and the body is all aluminum so there is no worry about rust. No more will you need to strip the cable, this thing takes the place of the bolt that you have to use now. Just as strong and secure. |
|
Product Description : |
|
SO-239 Cable Connector 1/2 inch stud $ 25.00 |
|
EASY AND SECURE BUYING WITH PAYPAL AND MOST MAJOR CREDIT CARDS FREE SHIPPING WITH ORDER OF $80 OR MORE. SHIPPING: $10 TO ANYWHERE IN U.S.A includes Alaska, Hawaii, Puerto Rico no weight limit Money Back Guarantee You do not need to have a paypal account, they just handle the transaction for me. |
