Truck Front Bed Rail Bracket

Pick up Truck Front Bed Rail Antenna Bracket $ 45.00

Front Bed Rail Bracket Set

As pictured using the Quick Disconnect Mount with the bolt

$ 75.00

EASY AND SECURE BUYING WITH PAYPAL AND MOST MAJOR CREDIT CARDS FREE SHIPPING WITH ORDER OF $80 OR MORE. SHIPPING: $10 TO ANYWHERE IN U.S.A includes Alaska, Hawaii, Puerto Rico no weight limit

Money Back Guarantee

You do not need to have a paypal account, they just handle the transaction.

******* Package Deals ********

This is a bracket for the pick-up truck so you can mount the antenna on the bed behind the cab. It was made for a Dodge truck but will fit all trucks with the adjustment. The antenna sits 4 inches above the bed rail.

The bracket was designed to fit across a bed wall that was 2-1/2 inches wide across the top with only 1-1/4 inch access between the cab and bed but this will fit with only 1 inch access. The bracket is 2 inches wide and made from 3/8 inch thick aluminum alloy (6061) with a 5/8 inch hole for the mount.

I have included more adjustment for smaller sizes on the extra brackets that I made. All aluminum alloy and as usual, stronger than it needs to be. The push plate that comes with it is to give it a better grip on the truck bed and to keep the bolts from marking the truck.

As you can see from the diagrams below, the bottom clamp locks onto the sheet metal lip and it is clamped across the top. This bracket will work on bed walls as thin as 1 inch across the top with a lip as short as 1/2 of an inch. The bottom clamp is in slots and adjusts up so the two bolts are against the metal lip when you tighten the clamp. Plus a place to hook a grounding strap if needed.

The dodge truck bed looked like this in cross section and was 2-1/2 inches wide at the top with the inside lip being 1 inch long. It will work with a truck bed that is a single wall as well